门窗磁防盗探测器磁开关

供应商
北京冠川科技有限公司
认证
报价
3.50元每
工作电压
100VDC(V)
品牌
冠川
报警电流
5(mA)
联系电话
84935219
联系人
张祥中
所在地
北京市昌平区北七家镇高科技工业园
更新时间
2015-10-16 11:50

详细介绍-


 技术参数:
 1.特   点  中间出线,安装不分左右
  2.认   证   公京检第030983号 
  欧盟ce ater20062620 
  3.外形尺寸   64*12.8*12.8mm
  4.主要材料     
  4.1 外    壳   abs/磁白色,abs/棕色可选
  4.2 连接材质   端子连接
  4.3 开    关   日本干簧管
  4.4 磁    铁   永磁
  5.电气指标    
  5.1 Zui大开关电压   100vdc,200vdc可选
  5.2 Zui大开关电流   0.5a
  5.3 Zui大开关功率   10w
  5.4 开关初始电阻  ≤200mω,线材加长电阻相应增大
  6.输出方式 信号输出   
  6.1 nc--常闭输出当磁铁靠近开关,干簧管触点闭合,信号线接通。如门被打开,磁铁离开开关,干簧触点断开,信号线中断,称为-----“断路报警”。
  6.2 no--常开输出 可选
  6.3 com-常开常闭  转换输出可选
  7.包装方式    
  7.1 内 包 装  10套/pe(15*20mm)
  7.2 外 包 装  600套/纸箱(375*295*300mm)

 

1.features the middle outlet, install either right or left
  2. beijing certified public inspection no. no. 030983
  eu ce ater20062620
  3. dimension 64 * 12.8 * 12.8mm
  4. main materials
  4.1 shell abs /magnetic white, abs / brown optional
  4.2 material terminals connected
  4.3 japanese reed switch
  4.4 permanent magnet
  5. electrical specifications
  5.1 maximumswitching voltage 100vdc, 200vdc optional
  5.2maximum switching current 0.5a
  5.3maximum switching power 10w
  5.4 switch the initial resistance ≤ 200mω, thecorresponding increase resistance wire extension
  6. output signal output
  6.1 nc - normally closed output when the magnet nearthe switch, reed switch contacts closed, the signal line connected.if the door is opened, the magnet left switch, reed contactdisconnect, interrupt signal lines, known as -----" circuit alarm."
  6.2 no - normally open output optional
  6.3 com-normally open normally closed output selectableconversion
  7. packing
  7.1 in 10 sets of packaging / pe (15 * 20mm)
  7.2 externalpackaging 600 sets / carton (375 * 295 * 300mm)

本产品的工作电压是100VDC(V),品牌是冠川,报警电流是5(mA),发射频率是315~433(MHZ),适用范围是门窗报警,类型是无线门磁,型号是GC-31门磁,发射距离是大于100(m),功率是10,发射芯片是2262,电压是100

展开全文
我们其他产品
在线询价 拨打电话